NISSAN 2013 Titan - Owner's Manual - Manual (Page 376)

1. Remove the 2 lower glove box hinge pins
᭺
A . Remove the glove box from the opening
and let it hang by the cord.
2. Remove the filter cover bolt and remove the
filter cover.
3. Remove the old in-cabin microfilters.
NOTE:
The filters are marked with air flow arrows.
The end of the filter with the arrow should
face the rear of the vehicle. The arrows
should face downward.
4. Insert the first filter into the housing and slide
it over to the right. Insert the second filter
into the housing.
5. Install the filter cover.
6. Install the glove box door.
7. Fill out the date information on the small
replacement label and attach it to the glove
box lid.
WDI0619 LDI0387 LDI0404
Maintenance and do-it-yourself 8-19