Gamo LLCP Laser and Light with Scope Mount - Manual (Page 3)

2
COMPONENTS OF THE KIT
Triple Mount
Flashlight
Laser sight
1 Push button and 1 remote switch for flashlight
1 Push button and 1 remote switch for laser sight
1 CR123A 3V battery for flashlight
3 LR44 1.5V batteries for laser sight
2 Velcro stickers
3 “L” hex wrench set
BE CERTAIN THAT YOUR AIR GUN IS UNLOADED AND POINTING
IN A SAFE DIRECTION.
ATTENTION: THIS LASER TARGET DESIGNATOR IS A POWERFUL DEVICETHAT REQUIRES
SPECIAL ATTENTION FOR ITS USE. READ THE FOLLOWING INSTRUCTIONS AND SAFETY
PRECAUTIONS CAREFULLY BEFORE USE.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURE OTHER THAN SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DANGER !
WARNING !
CAUTION !
LASER LIGHT - AVOID DIRECT EYE EXPOSURE. DANGER !
WARNING !
CAUTION !
KEEP OUT OF REACH OF CHILDREN.
DANGER !
WARNING !
CAUTION !
DO NOT DIRECT LASER AT PEOPLE, PETS, SHINY/HIGHLY REFLECTIVE
SURFACES, OR ANY OTHER OBJECT NOT INTENDED FOR DESIGNATED USE.
A.) MOUNTING THE LASER AND LIGHT TO A 1” SCOPE TUBE
1. Attach lower half of 1” mounts to rifle scope tube.
2. Attach upper half of mounts. DO NOT TIGHTEN SCREWS YET.
3. Place laser sight and flashlight onto “W” shaped lower part of mount.
3
DANGER !
WARNING !
CAUTION !
DANGER !
WARNING !
CAUTION !