Granite Digital SATA 2 Bay Aluminum Series - Manual (Page 15)

Granite Digital • 3101 Whipple Rd. • Union City, Ca. 94587 www.granitedigital.com
Page 15
Drive & Host Adapter Install
1 Bay External Specifics
The rear panel of the 1 Bay SATA System is simple and easy to use. The
power supply or cable from a powered PCI Host Adapter plugs into the DC In
connector. Next to that connector is the power on switch. This switch can be
used to power the drive mechansim on or off... or leave this switch in the on
position and simply pull the drive mechanism out about 1” and the drive will
disconnect and power down.
SATA “L” connector
from shielded cable
plugs in here.
Power Supply
or Powered
PCI DC In
Connector
SATA Power connector
allows one power supply
to power two drives.
The Optional SATA Power connector allows the case to supply power to
an additional drive mechanism or case. We use this connector to power the
second drive on our 2 Bay Systems.
When inserting the SATA Data Cable make sure the orientation is correct.
The “L” type SATA connector only plugs in one way.
Power Supply
On / Off switch.