Granite Digital SATA 2 Bay Aluminum Series - Manual (Page 7)

Granite Digital • 3101 Whipple Rd. • Union City, Ca. 94587 www.granitedigital.com
Page 7
Drive & Host Adapter Install
Gently slide the
SATA Drive Mechanism
in from the rear of the
tray. Locate the 4 screw
holes and line up the
drive mechanism. The
drive should be flush
with the rear of the tray.
The drive connectors should face
the rear of the tray.
Using a phillips
head screw driver install
the 4 mounting screws
that hold the drive in
place. Use only the flat
headed phillips screws
that are supplied. Make
sure they are tight and
that the rear of the drive
is flush with the rear of
the tray.
Once the drive mechanism has been securely attached
to the tray it can be safely moved and stored. Drives can
also be transported long distances with the use
our our padded carrying cases.
These cases protect the tray and
surround the mechanism with
shock absorbing foam. Packaging
a drive to shipment should be done
in a box with at least an additional 4”
of foam surrounding the padded carrying case.
Installing the Drive