Granite Digital SATA 2 Bay Aluminum Series - Manual (Page 8)

The tray slides back into the
Hot-Swap System with very little
effort. As the tray reaches the last
1/4 inch, push it in using the
handle. The tray will now be flush
with the front and has been seated
properly. Never force the tray into
place and always make sure there
is nothing in the opening before
inserting it.
Granite Digital • 3101 Whipple Rd. • Union City, Ca. 94587 www.granitedigital.com
Drive & Host Adapter Install
Page 8
Installing the Drive
The tray slides on two rails
and locks into place. Make
sure that both sides are even
when sliding it in.
When the tray is flush with the front it
has been inserted correctly. As the drive
slides into the connector in the rear of the
case you will be able to feel it lock into
place.
There is a power switch
that must be turned on in the
rear of the external systems.
Turn it on before inserting
the tray. This switch can be
used to power the drive or
simply remove the drive
from the system to power it
down.