Granite Digital SATA 8 Bay Rack Expandable - Manual (Page 8)

The tray slides back into the Hot-Swap System with very little effort. As
the tray reaches the last 1/4 inch, push it in using the handle. The tray will
now be flush with the front and has been seated properly. Never force the
tray into place and always make sure there is nothing in the opening before
inserting it.
Granite Digital • 3101 Whipple Rd. • Union City, Ca. 94587 www.granitedigital.com
Drive Install
Page 8
Installing the Drive
The tray slides on two rails
and locks into place. Make
sure that both sides are even
when sliding it in.
When the tray is flush with the front it has been inserted correctly. As the
drive slides into the connector in the rear of the case you will be able to feel it
lock into place.
There is a power switch
that must be turned on in the
rear of the external systems.
Turn it on before inserting
the tray. This switch can be
used to power the drive or
simply remove the drive
from the system to power it
down.