Granite Digital SATA LCD Hot-Swap - Manual (Page 10)

Granite Digital • 3101 Whipple Rd. • Union City, Ca. 94587 www.granitedigital.com
DRIVE INSTALLATION Page 10
Installing the Drive
The tray slides back into
the Hot-Swap System with
very little effort. As the tray
reaches the last 1/4 inch,
push it in using the handle.
The tray will now be flush
with the front and has been
seated properly. Never force
the tray into place and always
make sure there is nothing in
the opening before inserting
it.
When the tray is flush with the front it
has been inserted correctly. Turn the key
lock on to protect the drive from being
accidently removed. As soon as the tray is inserted
the RED (Drive Inserted LED)
will come on indicating that
the drive mechanism has
been istalled.
Note : There is a master
power switch that must be
turned on. This switch can
remain on all the time. The
tray insertion is what powers
the drive and can be used as
the power switch. Simply lift
the handle and remove the
tray to turn the drive off.