Granite Digital SATA LCD Hot-Swap - Manual (Page 8)

Granite Digital • 3101 Whipple Rd. • Union City, Ca. 94587 www.granitedigital.com
DRIVE INSTALLATION Page 8
Installing the Drive
Gently slide the SATA Drive Mechanism in from the rear of the tray.
Make sure the wires do not get pinched. Locate the 4 screw holes and line
up the drive mechanism.
Check to make sure that the wires
are inside their channel and not
sticking up. Do not pinch them
when the drive is secured with
the attachment screws.
Using a phillips head
screw driver install the (4)
mounting screws that hold the
drive in place. These screws
secure the drive and guarantee
that it will be properly grounded
when inserted into the system.
Do not over tighten the screws.
Once the (4) screws are inserted
check to make sure that no
cables are pinched and that the
drive is centered properly.
There are two different types of screws
used on drive mechanisms. We supply
both types. Test the screws to make sure
they are the correct size.