Using the dual output pwr supply, Page 10 – Granite Digital USB Emergency Drive User Manual
Page 10
Granite Digital • 3101 Whipple Rd. • Union City, Ca. 94587
www.granitedigital.com
Using the Dual Output Pwr Supply
Page 10
The Dual Output Power Supply is capable of supplying power to all types of
drives. When used with the included Auxiliary Power Cable, IDE, SATA, and
Floppy Drives can all be connected to the power supply.
The SATA Drive Power connector plugs into any SATA Drive Mechanism.
The “L” type connector must be oriented correctly before it is plugged in.
Power should only be supplied to the SATA Drive Mechanism after all the
cables have been connected including the SATA Data Cable from the Bridge
Adapter.
The IDE Drive Power connector plugs into any standard IDE, ATAPI, ATA, or
SCSI type of drive mechanism. Power should only be supplied to the Drive
Mechanism after the Data Cable has been connected to the Bridge Adapter.
Standard IDE Drive
Power 4-Pin Connector
SATA Drive Power
15 Contact Connector
Dual Output Switch
with LED Power ON
Indicators