Granite Digital USB Emergency Drive - Manual (Page 3)

Granite Digital • 3101 Whipple Rd. • Union City, Ca. 94587 www.granitedigital.com
Page 3 Included in the complete kit
Included in the Kit
The Granite USB to SATA / IDE Bridge Adapter Complete Kit includes the
items listed below. The Bridge Adapter and Power Supply can also be
purchased seperately.
USB to SATA / IDE Bridge Adapter
The Bridge Adapter is powered from the
USB bus. It can connect to three different
types of drive mechanisms. SATA drives connect
to the small SATA patch cable. This cable can be
replaced with a longer cable should it be
required. IDE drives connect through the 2.5”
connector or the 3.5”, 5.25” connector.
Dual Output Drive Power Supply
The Dual Output Power Supply provides
standard 4 Pin power output and new
SATA power output switched connectors.
Plug the drive mechanism in and then turn the
switched power connector on.
AC Power Cable
Uses standard IDC Connector (like computers) to
connect to AC outlet. Generic international
cables can be substituted for 220v operation.
Auxiliary Power For Floppy Drives
The Auxiliary Power Cable provides power to
small 4 pin powered devices like Floppy Drives.
This cable also provides additional 4 pin pass
through power for bridge boards or other devices.
USB 2.0 or 1.1 Port
SATA I or II Port
SATA Power
Connector
AC Power
Cable
IDE Power
Connector
Aux. Power Cable for
Floppy & Other Devices
3.5” or 5.25”
IDE Port
2.5” IDE Port