Iris Sample Processing StatSpin® CritSpin Microhematocrit System - Manual (Page 6)

2
Section
2
System Overview
Principle and Intended Use
For in vitro diagnostic use for determining packed red cell volume (PCV) or hematocrits (Hct).
The CritSpin is a microprocessor controlled, high-speed bench top centrifuge designed to rapidly
spin micro capillary tubes for packed cell determination. The preset cycle is for 120 seconds.
Symbols and Definitions
Start button The start button initiates the pre-timed cycle.
NOTE: The CritSpin does not have an on/off switch
and is normally left plugged in and “on”.
Stop/open button The stop/open button interrupts the cycle and stops
the centrifugation. This button may also be used to
release the cover.
Time Time indicator (120 s)
Error/Service
indicator The red LED identified, as error/service is illuminated
continuously or flashing when service is required.
Power input DC Power Input: 24V DC Plug-in
REF Product/Reference
Number Indicates the StatSpin product/catalog number
Caution Statement of caution/warning, read instruction
carefully
Temperature
limitation Indicates storage requirements range
IVD For in vitro
diagnostic use Clarifies for use as in vitro diagnostic only
Nn sterile Indicates non-sterile product
S N Serial Number Indicates instrument serial number code
Biological Risk Universal precautions should be followed on all
specimens
Consult
Instructions Consult instruction manual or insert sheet for further
explanation
IVD