Jeppesen JeppView 3 - Manual (Page 4)

4 5
To install the JeppView program on your computer:
1. Insert the Program CD into your computer CD-ROM drive. If the setup
program does not start automatically, browse to your computer
CD-ROM drive and double-click
setup.exe.
2. When the Welcome screen appears, click Next.
3. Read the information in the Installation Overview window and
click Next.
4. Read the license agreement and accept the terms, and then click Next.
5. In the Pilot Information dialog box, enter your name and 16-character
or alphanumeric serial number from the front of your CD album, and
then click
Next.
6. Click to select JeppView, FliteDeck, or both for installation, and then
click Next.
7. Select the path in which to install JeppView and FliteDeck, and click
Next. Jeppesen recommends that you use the default folder or a
location where other Jeppesen programs have previously been installed.
If you want to use a different drive or folder, click
Change, and then
type the path or browse to the folder that you want.
8. Click Next through the remaining screens, accepting all default options.
9. When the installation is complete, click Finish. A dialog box appears
instructing you to insert Disc 1. If your computer requires a reboot,
do so before continuing.
To deactivate JeppView:
1. Open the JeppView program folder (the default location is
C:\Jeppesen\JeppView3).
2. Double-click deactivate.exe.
3. If prompted, select JeppView and click OK.
4. Select the check box to continue and click Next.
5. Click Yes to deactivate JeppView.
6. Select a deactivation process (it is recommended that you select the
Internet(Automated) method if you have an Internet connection),
and click
Next.
7. Record your serial number and deactivation code, and click Finish.
8. Insert Disc 1 and complete the installation steps on the next page.
New JeppView Users Start Here
If this is your first time installing JeppView, follow
these steps. Ensure that you have administrative
permissions on your computer before starting.
Existing Users Start Here
If you changed your JeppView subscription to update
your MFD system, or currently use JeppView v3 with a
different serial number, you must deactivate your current
version. After you have deactivated JeppView, the Disc 1
installer will ask for your new JeppView serial number.
You do not need the Program CD.
Go to Page 6