Jeppesen JeppView 3 - Manual (Page 7)

10 11
Creating your First RoutePack and Route (Continued)
• UpdateLetter—includes a list of all terminal charts that have
changed since the last time the RoutePack was printed.
• Bookletprinting—to use booklet printing, you must have a printer
that can print on both sides of the paper (duplex printing). Only
the following options can be selected for Booklet printing:
JeppView
ChartsforRoutePack,Twoperpage, and Printonbothsides.
• The Jeppesen paper options are available for terminal charts, the
Revision Letter and the Update Letter options only. When selecting
any of the options under the Vector Chart section, NOTAMs, or
Airport Information, the Jeppesen paper selections are unavailable.
8. Save your RoutePack by right-clicking the RoutePack name, MyFirst
RoutePack, then clicking Save. Leave the default folder selected and click Save.
Working with the Airport List
The Airport List contains all of the
airports in your JeppView coverage
area. European VFR charts (formerly
the Bottlang Airfield Manual) were
added with the introduction of
JeppView version 3.5. If you have a
VFR chart subscription, the Airport
List displays the European VFR
airport and chart icons in green.
With an IFR and VFR subscription,
IFR airport icons are blue and VFR
airport icons are green to help
distinguish between the two types.
1. To sort the airports alphabetically by name, click the Name column.
An arrow marks the column by which the list is sorted, and indicates
descending or ascending order.
2. To sort the Airport List by distance from an airport in the list:
• Right-click an airport in the Airport List.
• Select ShowDistanceFromHere in the right-click menu.
• The distance from the selected airport displays in the Distance
from column. The Airport List displays the airports in order from
the airport closest to the selected point at the top of the list, to the
airport farthest away at the bottom.
3. To find an airport in the list, type the full or partial name or identifier
in the Search field in the lower left of the Airport List. The Airport
List moves to display the first match.
4. If the first match is not the airport you want, click Next until the
airport appears in the list.
5. To add an airport to your RoutePack outisde the route, click the name
of the airport in the Airport List, hold down the mouse button, and
drag it onto the RoutePack name,
MyFirstRoutePack, in the RoutePack
list and let go of the mouse button to drop it.
JeppView creates an Other Charts folder below the route waypoints.
This allows you to add non-route airports and charts for quick access
and printing along with the route charts.
6. To add an airport from the Airport List to the route, drag a different
airport onto the route name located just below the RoutePack name,
MyFirstRoutePack. This adds the airport to the beginning of the
route and not to the Other Charts folder. You can move the airport
in the route by dragging it below another airport or waypoint.
7. To print charts for an airport in the Airport List, right-click on an
airport and choose Print. Use the following methods to select multiple
airports:
• To select consecutive airports in the list, press SHIFT while clicking
two airports. All items between the two choices are selected.
• To select non-consecutive airports, press CTRL and click once on
each airport to select it.