Jeppesen JeppView 3 - Manual (Page 5)

6 7
Electronic Chart Data Disc 1 (DVD)
New users must install the Program CD prior to loading Disc 1. Once the
programs are installed, update the data every 14 days through the Internet
or with the disc updates received in the mail. To install your terminal
charts by DVD, follow these steps:
To install your terminal charts from the DVD, follow these steps:
1. Insert Disc 1 into your computer DVD reader. If the setup program
doesn’t start automatically, browse to your computer DVD drive and
double-click
setup.exe.
2. If you deactivated a JeppView 3 serial number, enter your new serial
number in the dialog that opens, and click Next.
JeppView MFD Users Only:
• If this is your first time installing Disc 1, click Yes to install the
Jeppesen Services Update Manager (JSUM). The JSUM application
transfers electronic chart data from JeppView to the media used
with your MFD system.
• If you previously installed JSUM, you may select the RunJeppesen
Services check box and click Next. This option launches JSUM near
the end of the Disc 1 update. This option is only available if JSUM
is already installed.
3. Verify that the terminal chart coverage(s) listed for your serial number
is the same as what you have purchased.
• If not, enter additional coverage codes you have (if applicable, select
IhaveadditionalCoverageCodes and click Next).
• Click Apply to add the coverages associated with those codes to the
list and click Next.
The coverage codes are located below the serial number on the back of
your DVD album. Purchase additional coverage codes by contacting
Jeppesen Sales and Service.
JeppView MFD Users Only:
• The JSUM installer opens during the Disc 1 update. For JSUM
installation steps and use, please go to page 17.
4. After the Disc 1 update is complete, continue the installation with the
Disc 2 steps on the next page.
Electronic Chart Data Disc 2 (CD)
To update Jeppesen aeronautical data, Airway Manual text data, and the
JeppView and FliteDeck programs when available, follow these steps:
1. Insert Disc 2 into the CD-ROM drive. If the setup program doesn’t start
automatically, browse to your CD-ROM drive and double-click setup.exe.
2. When the Welcome screen appears click Next.
JeppView MFD Users Only:
• If FliteDeck was not previously installed, this screen gives you the
option to install it. To add FliteDeck, click the InstallFliteDeck check
box, then click Next.
3. Review the Installation Summary and click Next.
4. Choose or skip the following options by checking or unchecking the box,
and click Next:
• Viewthereadmefile—Displays new information regarding the latest
program update.
• JeppesenWeatherService—Launches the Jeppesen Weather Service
installer for weather data display in FliteDeck, in conjunction with
an XM WxWorx Satellite Weather Service subscription. The Jeppesen
Weather Service option only appears if you are installing FliteDeck,
and you did not previously install the Jeppesen Weather Service.
For additional information about using your XM WxWorx Satellite
Weather Service in FliteDeck, refer to the JeppView FliteDeck User’s
Guide and Help file.
5. Follow the instructions in the remaining screens to finish the installation.
Check the data cycle and issue date on your disks to determine if you need
to update your data immediately through the Internet after the installation.