Global settings, Sleep mode, Flight info - allow flight sharing – Jeppesen Mobile FliteDeck for iPad User Manual
Page 13: Sleep mode flight info - allow flight sharing
Introduction
Global Settings
Jeppesen Mobile FliteDeck User Guide
October 2014
Copyright © 2014 Jeppesen. All rights reserved.
6
Four- finger Swipe Up and Down
Swipe four fingers up and down to show and hide the iPad
taskbar. This gesture is helpful when you want to go back and
forth between global settings and Jeppesen Mobile FliteDeck.
Global Settings
To adjust Jeppesen Mobile FliteDeck global settings:
• Tap Settings on your iPad Home screen.
• From the list of application settings, tap JeppFD.
Sleep Mode
Switch Sleep Mode to OFF to ensure that the iPad stays powered
on during flight. The setting is ON by default.
NOTE Switching Sleep Mode to OFF reduces the iPad
battery life.
Flight Info - Allow Flight Sharing
To share flight information between two iPads actively running
Jeppesen Mobile FliteDeck, ensure that Allow Flight Sharing is
set to ON. The setting is ON by default.
To share flight information, ensure that both iPads:
• Are actively running Jeppesen Mobile FliteDeck.
• Have Allow Flight Sharing set to ON.
• Have established a connection via Wi-Fi or Bluetooth.