Add sids and stars – Jeppesen Mobile FliteDeck for iPad User Manual
Page 22
Setting Up Your Flight
Create a New Flight
October 2014
Jeppesen Mobile FliteDeck User Guide
Copyright © 2014 Jeppesen. All rights reserved.
15
About Latitude and Longitude Coordinate Formats
The following latitude and longitude coordinate formats are
supported in the route description:
• NxxWxxx (N37W122)
• Nxx.x Wxxx.x (N37.5 W122.2)
• Nxx xx.x Wxxx xx.x (N37 56.6 W122 21.4)
• Nxx xx.xx Wxxx xx.xx (N37 56.60 W122 21.40)
• NxxxWxxxx (N375W1222)
• N xx xx W xxx xx (N 37 56 W 122 40)
• XXXXN (5275N)
• XXNXX (75N70)
• XXNXXXW(37N122W)
Add SIDs and STARs
After you enter origin and destination airports, you can enter a
SID or a STAR (or both) in the route description.
To render SID or STAR transition points on the enroute map use
this format:
• For a SID, enter: rwy.SID.transition
• For a STAR, enter: transition.STAR.rwy
For example, to enter the LBSTA Three RNAV departure out of
KBOS, departing on Runway 22L, via the LBSTA enroute
transition, you would enter: 22L.LBSTA3.LBSTA