Kraus KHU123-32-KPF1602-KSD30 - Manual (Page 2)

Congratulations on your new Kraus purchase!
We would like to take this opportunity to thank you for your business with Kraus USA.
It is our sincere hope that you are completely satisfied with your Kraus experience.
We welcome any questions or comments you may have, and look forward to assisting
you in the future.
For more information about Kraus products, please visit our website at:
www.kraususa.com.
In order to allow us to serve you better, we recommend registering your new Kraus
product at: www.kraususa.com/product-registration
Sincerely,
Kraus Customer Service Department
Prior to Installation
•
Make sure that the cold and hot water lines are turned off
•
Wrap all threaded connections with Teflon tape. Always wrap in a clockwise
direction
•
Cover your drain to avoid losing parts
•
Do not disassemble the main faucet body, as it has been installed & commissioned
correctly & precisely before delivery from the factory
•
To keep the faucet from jamming, flush the water pipe before installation
•
Using condition: Working pressure at 0.05-1.0MPa (including cold & hot water
pressure) with applicable water temperature: 40C-900C
•
The minimum distance between the faucet hole and the wall/backsplash is 3.5”
•
The faucet hole size must be between 1-3/8” and 1-1/2”
•
Check to make sure you have all included parts (page 2)
•
Do not assemble parts 9 -12 until step 4