Memory seats, Getting started – Dodge 2011 Grand_Caravan - User Guide User Manual

Page 17

Advertising
background image

Recliner

• Lift the recliner lever located on the

outboard side of the seat, lean back
and release at the desired position.

Memory Seats

• The memory seat feature allows you to save two different driver seating positions,

driver's outside mirror, adjustable brake and accelerator pedals, and radio station
preset settings. The memory seat buttons are located on the driver's door panel.

• Adjust all memory profile settings, press the SET button then press 1 or 2 within

five seconds.

• To program a Key Fob to the memory position, press and release the LOCK button

within 10 seconds on the Key Fob to be programmed.

• Place the ignition switch in the ON position, select Remote Linked to Memory in

the Electronic Vehicle Information Center (EVIC) and enter Yes.

• Press 1 or 2 to recall the saved positions, or press UNLOCK on the programmed

Key Fob.

CAUTION!

DO NOT place any article under a power seat or impede its ability to move as it
may cause damage to the seat controls. Seat travel may become limited if
movement is stopped by an obstruction in the seat's path.

WARNING!

• Adjusting a seat while the vehicle is moving is dangerous. The sudden

movement of the seat could cause you to lose control. The seat belt might
not be properly adjusted, and you could be severely injured or killed. Only
adjust a seat while the vehicle is parked.

• Do not ride with the seatback reclined so that the seat belt is no longer

resting against your chest. In a collision, you could slide under the seat belt
and be severely injured or killed. Use the recliner only when the vehicle is
parked.

GETTING STARTED

15

Advertising