Rear wiper, High beams, Flash to pass – Dodge 2011 Grand_Caravan - User Guide User Manual

Page 21: Operating your vehicle

Advertising
background image

NOTE: The mist feature does not activate the washer pump; therefore, no washer fluid
will be sprayed on the windshield. The wash function must be used in order to spray
the windshield with washer fluid.

Washer Operation

• Push the end of the lever inward to the second detent and hold for as long as spray

is desired.

Rear Wiper

• Rotate the center portion of the lever forward to the first detent for rear wiper

operation.

Rear Washer

• Rotate the center portion of the lever past the first detent to activate the rear

washer.

High Beams

• Push the lever away from you to activate the high beams.

• A high beam symbol will illuminate in the cluster to indicate the high beams are

on.

NOTE: For safe driving, turn off the high beams when oncoming traffic is present to
prevent headlight glare and as a courtesy to other motorists.

Flash To Pass

• Pull the lever toward you to activate the high beams. The high beams will remain

on until the lever is released.

OPERATING YOUR VEHICLE

19

Advertising