Activating rear automatic temperature control, Parksense® rear park assist, Parkview® rear back-up camera – Dodge 2011 Grand_Caravan - User Guide User Manual

Page 28: Operating your vehicle, Parksense, Rear park assist, Parkview, Rear back-up camera, Warning

Advertising
background image

Activating Rear Automatic Temperature Control

• Pressing the REAR LOCK button for the Rear ATC System from the front lower ATC

panel, illuminates a LOCK symbol in the rear display. The rear temperature and air
source are controlled from the front lower ATC panel.

• Rear second row occupants can only adjust the rear ATC control when the REAR

LOCK button is turned off.

• The Rear ATC System is located in the headliner, near the center of the vehicle.

PARKSENSE

®

REAR PARK ASSIST

• If an object is detected behind the rear bumper while the vehicle is in REVERSE, a

warning will display in the instrument cluster and a tone, that changes speed
depending on the distance of the object from the bumper, will sound.

• When the Instrument Cluster reads either “Clean Sensor” or “Blinded”, clean off

the bumper sensors to see if the condition is corrected.

PARKVIEW

®

REAR BACK-UP CAMERA

• You can see an on-screen image of the rear of your vehicle whenever the shift lever

is put into REVERSE. The ParkView

®

Rear Back-Up Camera image will be

displayed on the radio display screen, located on the center stack of the
instrument panel.

• If the radio display screen appears foggy, clean the camera lens located on the

liftgate.

WARNING!

Drivers must be careful when backing up even when using the ParkView

®

Rear

Back-Up Camera. Always check carefully behind your vehicle, and be sure to
check for pedestrians, animals, other vehicles, obstructions, or blind spots
before backing up. You must continue to pay attention while backing up.
Failure to do so can result in serious injury or death.

OPERATING YOUR VEHICLE

26

Advertising