Operating your vehicle, Turn signal/lights lever, Headlights/parking lights – Dodge 2011 Nitro - User Guide User Manual

Page 19: Instrument panel dimmer, Flash to pass, High beam operation, Fog lights

Advertising
background image

TURN SIGNAL/LIGHTS LEVER

Headlights/Parking Lights

• Rotate the end of the lever to the first detent for parking lights

and to the

second detent for headlights

.

Instrument Panel Dimmer

• Rotate the center portion of the lever to the extreme bottom position to fully dim

the instrument panel lights and prevent the interior lights from illuminating when a
door is opened.

• Rotate the center portion of the lever up to increase the brightness of the

instrument panel lights when the parking lights or headlights are on.

• Rotate the center portion of the lever upward to the next detent position to

brighten the odometer and radio controls when the parking lights or headlights are
on.

• Rotate the center portion of the lever upward to the last detent to turn on the

interior lighting.

Flash To Pass

• Pull the lever toward you to activate the high beams. The high beams will remain

on until the lever is released.

High Beam Operation

• Push the lever forward to activate the high beams.

NOTE: For safe driving, turn off the high beams when oncoming traffic is present to
prevent headlight glare and as a courtesy to other motorists.

Fog Lights

• Turn on the parking lights or low beam headlights and pull out the end of the lever.

OPERATING YOUR VEHICLE

17

Advertising