Dodge 2012 Caliber - User Guide - Manual (Page 66)

Jacking Instructions
NOTE: Refer to “Tires — General
Information” in “Starting And Operating” in
the Owner's Manual on the DVD for further
information about the spare tire, it's use,
and operation.
1. Remove the scissors jack and lug
wrench from the spare wheel as an
assembly. Turn the jack screw to the left
to loosen the lug wrench and remove
the wrench from the jack assembly.
2. Loosen, but do not remove, the wheel nuts by turning them to the left one turn
while the wheel is still on the ground.
NOTE: There are front and rear jacking locations on each side of the body. The front
locations are outlined by two triangular cutouts, the rear locations by two rectangular
cutouts.
WHAT TO DO IN EMERGENCIES
64