Programming additional transmitters, Transmitter battery replacement – Dodge 2013 Avenger - Owner Manual User Manual

Page 29

Advertising
background image

NOTE:

You may need to be close to the vehicle when

using the RKE transmitter to turn off the Panic Alarm due
to the Radio Frequency (RF) noises emitted by the system.

Programming Additional Transmitters

Refer to Sentry Key® “Customer Key Programming.”

If you do not have a programmed RKE transmitter,
contact your authorized dealer for details.

Transmitter Battery Replacement

The recommended replacement battery is CR2032.

NOTE:

Perchlorate Material — special handling may

apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate

1. With the RKE transmitter buttons facing down, use a

flat blade screwdriver to pry the two halves of the RKE
transmitter apart. Make sure not to damage the seal
during removal.

2. Remove and replace the battery. Avoid touching the

new battery with your fingers. Skin oils may cause
battery deterioration. If you touch a battery, clean it
with rubbing alcohol.

3. To assemble the RKE transmitter case, snap the two

halves together.

Separating RKE Transmitter Halves

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

27

Advertising