To exit remote start mode and drive the vehicle – Dodge 2013 Avenger - Owner Manual User Manual

Page 33

Advertising
background image

Remote start will also cancel if any of the following occur:

• The engine stalls or RPM exceeds 2500
• Any engine warning lamps come on
• Low Fuel Light turns on
• The hood is opened
• The hazard switch is pressed
• The transmission is moved out of PARK
• The brake pedal is pressed

To Exit Remote Start Mode Without Driving The
Vehicle

Press and release the REMOTE START button one time or
allow the engine to run for the entire 15 minute cycle.

NOTE:

To avoid unintentional shut downs, the system

will disable the one-time press of the Remote Start button
for two seconds after receiving a valid remote start
request.

To Exit Remote Start Mode And Drive The Vehicle

Before the end of the 15 minute cycle, press and release the
UNLOCK button on the RKE transmitter to unlock the
doors and disarm the Vehicle Security Alarm (if equipped).
Then insert the key into the ignition switch and turn the
switch to the ON/RUN position.

NOTE:

The ignition switch must be in the ON/RUN

position in order to drive the vehicle.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

31

Advertising