Headlamp – Dodge 2013 Avenger - Owner Manual User Manual
Page 472
Advertising
Headlamp
1. Raise the hood and locate the connector behind the
headlamp.
NOTE:
It may be necessary to remove the air cleaner
filter housing and position the totally integrated power
module aside prior to replacing the low beam headlamp
on the driver’s side of the vehicle.
2. Reach into engine compartment and from behind the
lamp assembly and grasp the connector.
3. Rotate bulb and connector ¼ turn and pull outward
from assembly.
470
MAINTAINING YOUR VEHICLE
Advertising