Enabling/disabling parksense, Service the parksense® rear park assist system, Service the parksense® rear park assist – Dodge 2013 Challenger - Owner Manual User Manual

Page 182: System

Advertising
background image

Enabling/Disabling ParkSense®

ParkSense® can be enabled and disabled through the

Customer-Programmable Features section of the EVIC.

The available choices are: OFF, Sound Only, or Sound and

Display. Refer to “Electronic Vehicle Information Center

(EVIC)/Personal Settings (Customer-Programmable Fea-

tures)” in “Understanding Your Instrument Panel” for

further information.
When ParkSense® is disabled, the instrument cluster will

display the “PARK ASSIST SYSTEM OFF” message for

approximately five seconds. Refer to “Electronic Vehicle

Information Center (EVIC)” in “Understanding Your

Instrument Panel” for further information. When the

shift lever is moved to REVERSE and the system is

disabled, the EVIC will display the “PARK ASSIST SYS-

TEM OFF” message for as long as the vehicle is in

REVERSE.

Service The ParkSense® Rear Park Assist
System

During vehicle start up, when the ParkSense® Rear Park

Assist System has detected a faulted condition, the

instrument cluster will actuate a single chime, once per

ignition cycle, and it will display the “CLEAN PARK

ASSIST”, “SERVICE PARK ASSIST” or “SERVICE PARK

ASSIST SYSTEM” message for five seconds. Refer to

“Electronic Vehicle Information Center (EVIC)” in “Un-

derstanding Your Instrument Panel” for further informa-

tion. When the shift lever is moved to REVERSE and the

system has detected a faulted condition, the EVIC will

display the “CLEAN PARK ASSIST”, ЉSERVICE PARK

ASSISTЉ or the “SERVICE PARK ASSIST SYSTEM” mes-

sage for as long as the vehicle is in REVERSE. Under this

condition, ParkSense® will not operate.

180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising