Using homelink, Security, Troubleshooting tips – Dodge 2013 Challenger - Owner Manual User Manual

Page 193

Advertising
background image

Using HomeLink®

To operate, press and release the programmed

HomeLink® button. Activation will now occur for the

programmed device (i.e., garage door opener, gate opera-

tor, security system, entry door lock, home/office light-

ing, etc.,). The hand-held transmitter of the device may

also be used at any time.

Security

It is advised to erase all channels before you sell or turn

in your vehicle.
To erase the channels press and hold the two outside

HomeLink® buttons (I and III) for up 20 seconds. The

Electronic Vehicle Information Center (EVIC) will display

“CLEARING CHANNELS”. Release the buttons when

the EVIC displays “CHANNELS CLEARED”.

The HomeLink® Universal Transceiver is disabled when

the Vehicle Security Alarm is active.

Troubleshooting Tips

If you are having trouble programming HomeLink®,

here are some of the most common solutions:
• Replace the battery in the original hand-held transmit-

ter.

• Press the LEARN button on the Garage Door Opener

to complete the training for a Rolling Code.

• Did you unplug the device for programming and

remember to plug it back in?

If you have any problems, or require assistance, please

call toll-free 1–800–355–3515 or, on the Internet at

www.HomeLink.com for information or assistance.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191

Advertising