To disarm the system – Dodge 2013 Challenger_SRT - Owner Manual User Manual

Page 22

Advertising
background image

same exterior zone (refer to ЉKeyless Enter-N-Go™Љ

in ЉThings To Know Before Starting Your VehicleЉ for

further information).

• Press the LOCK button on the Remote Keyless Entry

(RKE) transmitter.

3. If any doors are open, close them.

To Disarm The System

The Vehicle Security Alarm can be disarmed using any of

the following methods:

• Press the UNLOCK button on the Remote Keyless

Entry (RKE) transmitter.

• Grasp the Passive Entry Unlock Door Handle (if

equipped, refer to ЉKeyless Enter-N-Go™Љ in ЉThings

To Know Before Starting Your VehicleЉ for further

information).

• For vehicles equipped with Keyless Enter-N-Go™,

press the Keyless Enter-N-Go™ Start/Stop button

(requires at least one valid Key Fob in the vehicle).

• For vehicles not equipped with Keyless Enter-N-Go™,

insert a valid key into the ignition switch and turn the

key to the ON position.

NOTE:

The driver’s door key cylinder and the trunk

button on the RKE transmitter cannot arm or disarm the

Vehicle Security Alarm.

• The Vehicle Security Alarm remains armed during

trunk entry. Pressing the trunk button will not disarm

the Vehicle Security Alarm. If someone enters the

vehicle through the trunk and opens any door the

alarm will sound.

20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising