Keyless enter-n-go™ — if equipped – Dodge 2013 Challenger_SRT - Owner Manual User Manual

Page 38

Advertising
background image

4. Within 30 seconds, press the power door UNLOCK

switch to unlock the doors.

5. A single chime will indicate the completion of the

programming.

NOTE:

If you do not hear the chime, it means that the

system did not enter the programming mode and you

will need to repeat the procedure.

6. Repeat these steps if you want to return this feature

to its previous setting.

NOTE:

Use the Automatic Unlock Doors On Exit feature

in accordance with local laws.

KEYLESS ENTER-N-GO™ — IF EQUIPPED

The Passive Entry system is an enhancement to the

vehicle’s Remote Keyless Entry (RKE) system and a

feature of Keyless Enter-N-Go™. This feature allows you

to lock and unlock the vehicle’s door(s) without having to

press the RKE transmitter lock or unlock buttons.
NOTE:

• Passive Entry may be programmed ON/OFF; refer to

“Uconnect® Settings” in “Understanding Your Instru-

ment Panel” for further information.

• If wearing gloves on your hands, or if it has been

raining on the Passive Entry door handle, the unlock

sensitivity can be affected, resulting in a slower re-

sponse time.

• If the vehicle is unlocked by Passive Entry door handle

and no door goes ajar within 60 seconds, the vehicle

will re-lock and if equipped will arm the theft alarm.

To Unlock From The Driver’s Side:

With a valid Passive Entry RKE transmitter within 5 ft

(1.5 m) of the driver door handle, grab the front driver

36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising