Set/rnd button — to set the pushbutton memory, Buttons 1 - 6, Disc button – Dodge 2013 Challenger_SRT - Owner Manual User Manual

Page 246: Operation instructions — cd mode for cd and, Mp3 audio play

Advertising
background image

SET/RND Button — To Set the Pushbutton
Memory
When you are receiving a station that you wish to

commit to pushbutton memory, press the SET/RND

button. The symbol SET 1 will now show in the display

window. Select the button (1 to 6) you wish to lock onto

this station and press and release that button. If a button

is not selected within five seconds after pressing the

SET/RND button, the station will continue to play but

will not be stored into pushbutton memory.
You may add a second station to each pushbutton by

repeating the above procedure with this exception: Press

the SET/RND button twice and SET 2 will show in the

display window. Each button can be set for SET 1 and

SET 2 in both AM and FM. This allows a total of 12 AM

and 12 FM stations to be stored into pushbutton memory.

The stations stored in SET 2 memory can be selected by

pressing the pushbutton twice.

Every time a preset button is used, a corresponding

button number will display.
Buttons 1 - 6
These buttons tune the radio to the stations that you

commit to pushbutton memory (12 AM and 12 FM

stations).
DISC Button
Pressing the DISC button will allow you to switch from

AM/FM modes to Disc modes.

Operation Instructions — CD MODE For CD And
MP3 Audio Play

NOTE:

• The ignition switch must be in the ON or ACC position

to operate the radio.

• This radio is capable of playing compact discs (CD),

recordable compact discs (CD-R), rewritable compact

244 UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising