Vehicle security alarm — if equipped, Rearming of the system, To arm the system – Dodge 2014 Charger-SRT - Owner Manual User Manual

Page 21

Advertising
background image

VEHICLE SECURITY ALARM — IF EQUIPPED

The Vehicle Security Alarm monitors the vehicle doors
for unauthorized entry and the Keyless Enter-N-Go™
START/STOP button for unauthorized operation. While
the Vehicle Security Alarm is armed, interior switches for
door locks and decklid release are disabled. If something
triggers the alarm, the Vehicle Security Alarm will pro-
vide the following audible and visible signals: the horn
will pulse, the park lamps and/or turn signals will flash,
and the Vehicle Security Light in the instrument cluster
will flash.

Rearming Of The System

If something triggers the alarm, and no action is taken to
disarm it, the Vehicle Security Alarm will turn the horn
off after three minutes, turn all of the visual signals off
after 15 additional minutes, and then the Vehicle Security
Alarm will rearm itself.

To Arm The System

Follow these steps to arm the Vehicle Security Alarm:

1. Make sure the vehicles ignition is cycled to the “OFF”

position (refer to

ЉStarting ProceduresЉ in ЉStarting

And Operating

Љ for further information).

• For vehicles equipped with Keyless Enter-N-Go™,

make sure the vehicle ignition system is OFF.

• For vehicles not equipped with Keyless Enter-N-Go™,

make sure the vehicle ignition system is OFF and the
key is physically removed from the ignition.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

19

Advertising