To open and close the hood – Dodge 2014 Charger-SRT - Owner Manual User Manual

Page 221

Advertising
background image

Keyless Enter-N-Go™), the driver’s seat will move to a
position 0.3 in (7.7 mm) forward of the rear stop if the
driver’s seat position is between 0.9 in and 2.7 in (22.7 mm
and 67.7 mm) forward of the rear stop. The seat will
return to its previously set position when you place the
ignition in the ACC or RUN position.

• The Easy Entry/Easy Exit feature is disabled when the

driver’s seat position is less than 0.9 in (22.7 mm) forward
of the rear stop. At this position, there is no benefit to the
driver by moving the seat for Easy Exit or Easy Entry.

Each stored memory setting will have an associated Easy
Entry and Easy Exit position.

NOTE:

The Easy Entry/Exit feature is not enabled when

the vehicle is delivered from the factory. The Easy
Entry/Exit feature is enabled (or later disabled) through
the programmable features in the Uconnect® system.
Refer to “Uconnect® Settings” in “Understanding Your
Instrument Panel” for further information.

TO OPEN AND CLOSE THE HOOD

Two latches must be released to open the hood.

1. Pull the hood release lever located under the left side

of the instrument panel.

Hood Release Lever

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

219

Advertising