Cleaning the parksense® system, Parksense® system usage precautions – Dodge 2015 Challenger-SRT - Owner Manual User Manual

Page 191

Advertising
background image

If “PARKSENSE UNAVAILABLE WIPE REAR SEN-

SORS” appears in the Driver Information Display (DID),

make sure the outer surface and the inside of the rear

fascia/bumper is clean and clear of snow, ice, mud, dirt

or other obstruction, and then cycle the ignition. If the

message continues to appear see an authorized dealer.
If “PARKSENSE UNAVAILABLE SERVICE REQUIRED”

appears in the DID, see an authorized dealer.

Cleaning The ParkSense® System

Clean the ParkSense® sensors with water, car wash soap

and a soft cloth. Do not use rough or hard cloths. Do not

scratch or poke the sensors. Otherwise, you could dam-

age the sensors.

ParkSense® System Usage Precautions

NOTE:
• Ensure that the rear bumper is free of snow, ice, mud,

dirt and debris to keep the ParkSense® system oper-

ating properly.

• Jackhammers, large trucks, and other vibrations could

affect the performance of ParkSense® or render the

system temporarily unavailable.

• When you turn ParkSense® off in DRIVE, the instru-

ment cluster will display ЉPARKSENSE OFFЉ for five

seconds. Furthermore, once you turn ParkSense® off,

it remains off until you turn it on again, even if you

cycle the ignition.

• When you move the shift lever to the REVERSE

position and ParkSense® is turned off, the Driver

Information Display (DID) will display “PARKSENSE

OFF” message for as long as the vehicle is in RE-

VERSE.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189

Advertising