Cooling system — drain, flush and refill, Selection of coolant – Dodge 2015 Challenger-SRT - Owner Manual User Manual

Page 495

Advertising
background image

coolant from the radiator drain cock. If the cap is sealing

properly, the engine coolant (antifreeze) will begin to

drain from the coolant recovery bottle. DO NOT RE-

MOVE THE COOLANT PRESSURE CAP WHEN THE

COOLING SYSTEM IS HOT.
Cooling System — Drain, Flush And Refill

NOTE:

Some vehicles require special tools to add coolant

properly. Failure to fill these systems properly could lead

to severe internal engine damage. If any coolant is

needed to be added to the system please contact your

local authorized dealer.
If the engine coolant (antifreeze) is dirty or contains

visible sediment, have an authorized dealer clean and

flush with OAT coolant (antifreeze) (conforming to

MS.90032).

NOTE:

If equipped with the 6.2L Supercharged engine

the intercooler must be vacuum flushed and filled. If any

coolant is needed to be added to the system please

contact your local authorized dealer.
Refer to the “Maintenance Schedule” for the proper

maintenance intervals.
Selection Of Coolant
Refer to “Fluids, Lubricants, and Genuine Parts” in

“Maintaining Your Vehicle” for further information.

7

MAINTAINING YOUR VEHICLE 493

Advertising