Operation – Dodge 2015 Challenger-SRT - Owner Manual User Manual

Page 368

Advertising
background image

Operation
When the shift lever is in the DRIVE (D) position, the

transmission will operate automatically, shifting between

the eight available gears. To activate AutoStick, move the

shift lever into the MANUAL (M) position (beside the

DRIVE position). The current transmission gear will be

displayed in the instrument cluster, along with a high-

lighted ЉMЉ (Manual) indication. When the shift lever is

in the MANUAL (M) position, tap the shift lever forward

(-) (or tap the (-) shift paddle on the steering wheel) to

downshift the transmission to the next lower gear, (or tap

the lever rearward (+) or tap the (+) shift paddle), to

command an upshift.
NOTE:

Tapping one of the steering wheel-mounted shift

paddles (+/-), while the shift lever is in DRIVE, will

activate a temporary AutoStick mode. Tapping (-) to

enter AutoStick mode will downshift the transmission to

the next lower gear, while using (+) to enter AutoStick

mode will retain the current gear. The current gear will be

displayed in the instrument cluster, but the ЉMЉ will not

be highlighted. The transmission will revert back to

normal operation (if the shift lever remains in DRIVE)

after a period of time, depending on accelerator pedal

activity.
In AutoStick mode, the transmission will shift up or

down when (+/-) is manually selected by the driver

(using the shift lever, or the shift paddles), unless an

engine lugging or overspeed condition would result. It

will remain in the selected gear until another upshift or

downshift is chosen, except as described below.

• In temporary AutoStick mode (shift lever in DRIVE),

the transmission will automatically shift up when

maximum engine speed is reached. Lack of accelerator

pedal activity will cause the transmission to revert to

automatic operation.

366 STARTING AND OPERATING

Advertising