Audio jack operation, Usb port – Dodge 2015 Dart - User Guide User Manual

Page 58

Advertising
background image

Audio Jack Operation

The Audio Jack allows a portable device, such as an MP3 player or an iPod

®

to be plugged

into the center console and utilize the vehicle’s audio system, using a 3.5 mm stereo audio
cable, to amplify the source and play through the vehicle speakers.

Pushing the PLAYER button will change the
mode to auxiliary device if the Audio Jack is
connected, allowing the music from your
portable device to play through the vehicle's
speakers.

The functions of the portable device are
controlled using the device buttons. The
volume may be controlled using the radio or
portable device.

USB Port

Connect your iPod

®

/MP3 or compatible de-

vice using a USB cable into the USB Port.
USB Memory sticks with audio files can
also be used. Then, audio from the device
can be played on the vehicles sound system
while providing metadata (artist, track title,
album, etc.) information on the radio dis-
play.

Pushing the PLAYER button will change the device mode between connected auxiliary
devices.

When connected, the MP3 Player/compatible USB device can be controlled using the
radio or Steering Wheel Audio Controls or Voice Commands to play, skip to the next or
previous track, browse, and list the contents.

The MP3/WMA Player battery charges when plugged into the USB port (if supported by
the specific device).

To route the audio cable out of the center console, use the access cut out on the right side
of the console.

NOTE:
• Your vehicle cannot be equipped with the USB Port without having the available

Uconnect

®

Voice Command feature.

USB/Audio Jack

1 — USB Port and AUX Jack

2 — Audio Cable Access

E L E C T R O N I C S

56

Advertising