Garmin® navigation (8.4n only) – Dodge 2015 Dart - User Guide User Manual

Page 74

Advertising
background image

The CD/Disc can also be selected by pressing the “Player” button on the touchscreen,
then press the “Source” button on the touchscreen and then press the “Disc” button on
the touchscreen.

NOTE:
• Depending on the CD/Disc being used, you will only be able to browse by folder.

• There are Voice Commands available while in this mode. Refer to the Uconnect

®

Voice

Command section in this guide.

Bluetooth® Streaming Audio
• If equipped with Uconnect

®

Voice Command, your Bluetooth-equipped MP3 Player

devices, cell phones or other media players, may also be able to stream music to your
vehicle's sound system. Your connected device must be Bluetooth-compatible, and
paired with your Uconnect

®

system (see Uconnect

®

Phone section or

www.UconnectPhone.com for pairing instructions). You can access the music from
your connected Bluetooth

®

device by touching the Source soft-key while in Player

mode.

Garmin® Navigation (8.4N Only)

Uconnect

®

8.4N integrates Garmin’s consumer-friendly navigation into your vehicle.

Garmin Navigation includes Lane Assist and Junction View, Speed Limit information, and
a database with over six million points of interest.
• Press the “Nav” button on the touchscreen in the menu bar to access the Navigation

system.

Changing The Navigation Voice Prompt Volume
1. Program a destination.
2. While traveling on your route, press the upper left area of the map screen where your

next turn is displayed.

3. The Navigation system will then repeat the distance to your next turn.
4. While the Navigation system is speaking, use the ON/OFF VOLUME rotary knob to

adjust the volume to a comfortable level. Please note the volume setting for Navigation
Voice Prompt is different than the audio system.

E L E C T R O N I C S

72

Advertising