Programmable features, Compass calibration, Driver information display (did) – Dodge 2015 Dart - User Guide User Manual

Page 91: Premium (4 button)

Advertising
background image

Programmable Features

The EVIC can be used to select the following vehicle information/personal settings. To step
to each main menu feature push the UP

button once for each step. A step from the

last item in the list will cause the first item in the feature list to be displayed. The following
features are in the Main menu:

• Odometer

• Oil Life

• Digital Speedometer

• Tire Pressure Monitor

• Trip Meter

• Stored Messages

• Fuel Economy

• Settings

NOTE:
For features in the EVIC that can be reset (Average Fuel Economy), the EVIC prompts a
reset with a RIGHT arrow button graphic and the word RESET next to it.

DRIVER INFORMATION DISPLAY (DID) — PREMIUM (4 BUTTON)

The DID features a driver interactive display
that is located in the instrument cluster.
Pushing the controls on the left side of the
steering wheel allows the driver to select
vehicle information and Personal Settings.
For additional information, refer to “Pro-
grammable Features” in this guide.
• Push the UP

button to scroll up-

ward through the main menus (Fuel
Economy, Vehicle Info, Tire PSI, Cruise,
Messages, Trip Info, Vehicle Speed and
Turn Menu Off) and sub menus.

• Push the DOWN

button to scroll

downward through the main menus and
sub menus.

• Push the RIGHT

button for access to main menus, sub menus or to select a

personal setting in the setup menu. Push and hold the RIGHT

button for two

seconds to reset features

• Push the LEFT

button to scroll back to a previous menu or sub menu.

Compass Calibration

This compass is self-calibrating, which eliminates the need to set the compass manually.
When the vehicle is new, the compass may appear erratic and the DID will display “CAL”
until the compass is calibrated.

Four Button DID Controls

E L E C T R O N I C S

89

Advertising