Canon EOS 1D - Manual (Page 247)

247
You can check the battery’s condition on a menu screen.
Select [Battery info.].
Under the [6] tab, select [Battery
info.], then press <0>.
3 Checking the Battery Information
The model of the battery or household
power source (sold separately) being
used is displayed.
Next to the battery check (p.35), the
remaining battery capacity is
displayed in 1% increments.
Shots taken with the current battery.
The number is reset when the battery
is recharged.
Battery’s recharge performance level is displayed in
one of three levels (p.29).
(Green): Battery’s recharge performance is
fine.
(Green): Battery’s recharge performance is
slightly degraded.
(Red): Purchasing a new battery is recommended.
Do not use any battery other than Battery Pack LP-E4. Otherwise, the
camera’s full performance may not be attained or malfunction may result.
The shutter count is the number of still photos taken. (Movies are not
counted.)
If [Calibration is recommended when charging battery next time] is
displayed, see page 30.
If you set the power switch to <1/J> and communication with the
battery is faulty for some reason, [Cannot communicate with battery]
will be displayed. Select [OK] and you can continue shooting. In such a
case, the <
> battery check icon will light on the top LCD panel.
COP
Y