Canon EOS 1D - Manual (Page 34)

34
<2> : The camera is turned off and
does not operate. Set to this
position when not using the
camera.
<1> : The camera turns on.
<J>
: The camera and <5> operate
(p.43).
Whenever you set the power switch to
<1/J> or <2>, the sensor
cleaning will be executed automatically.
During the sensor cleaning, the LCD
monitor will display <f>.
Even during the sensor cleaning, you
can still shoot by pressing the shutter
button halfway (p.41) to stop the
sensor cleaning and take a picture.
If you turn on/off the power switch
<1/J>/<2> at a short interval,
the <f> icon might not be displayed.
This is normal and not a problem.
To save battery power, the camera turns off automatically after
approx. 1 minute of non-operation. To turn on the camera again, just
press the shutter button halfway (p.41).
You can change the auto power-off time with the menu’s [5 Auto
power off] setting (p.52).
Turning on the Power
Power/Quick Control Dial Switch
About the Automatic Self-Cleaning Sensor
About Auto Power Off
If you set the power switch to <2> while an image is being recorded to
the card, [Recording ...] will be displayed and the power will turn off after
the card finishes recording the image.
COP
Y