Coleman 8350 Series - Manual (Page 17)

17
Lighting Main Burners
CAUTION
Use a LONG wooden match or a butane lighter with an extension. Make sure all burner
controls are off except for the burner being lighted. If a long-reach match or lighter is not
accessible, there is a match extension provided. Insert a match in the holder end of the
extension, strike and place the burning match near the BURNER being operated.
1. Push and turn one of the main burner control knobs counterclockwise to the “HIGH”
position. Wait 5 seconds. (Fig. 17 and 18)
2. Press and hold the electronic igniter button. You will hear a snapping sound. (Fig. 19)
3. If the burner does not light in 4 seconds, turn the control knob to OFF and wait 5 minutes for
the gas to clear before trying again.
4. Repeat steps 1 through 3 to light the remaining burners.
5. If the burner does not light on the second try, turn the control knob to OFF and wait 5
minutes for the gas to clear, and then try match-lighting the burner.
Match Lighting - Main Burners
1. Strike and place the burning long wooden match (or butane lighter with extension) through
the spaces in the grill grates near the ports of the back crossover burner between the heat
tents. (Fig. 20).
2. Push and turn the control knob counterclockwise to the “HIGH” position.
3. Repeat steps 1 and 2 to light the remaining burners.
Fig. 19
Fig. 18
Fig. 20