Canon ImageCLASS MF8180c - Manual (Page 18)

Preparation for Protocol Settings 2-7
Sp
ec
ifyin
g
th
e Ne
twor
k Set
tin
gs
2
3
Execute the applicable command below to set the IP address for
the network board.
ping <IP Address> -l 479
Input Example: ping 172.20.88.125 -l 479
NOTE
• The character “-l” is the alphabet letter “L.”
• The Subnet Mask and Gateway Address are set as <0.0.0.0>.
The preparation for the machine’s protocol settings are complete.
Settings Using NetSpot Device Installer
The following is the procedure for specifying the settings using NetSpot Device
Installer.
1
Insert the CD-ROM supplied with the printer into the CD-ROM
drive.
2
Double-click the [My Computer] icon on the screen
➞ right-click
the CD-ROM drive icon
➞ click [Open] on the pop-up menu.
3
In the [NetSpot_Device_Installer] folder on the CD-ROM, run
[nsdi.exe].
4
From the list, select the device whose [Device Name] is the MAC
address of the printer with [Not Configured] displayed in [Status].