Canon ImageCLASS MF8180c - Manual (Page 40)

Network Setting Items 3-4
Ap
pen
dix
3
Network Setting Items Using NetSpot Console, NetSpot Device
Installer, or a Web Browser (Remote UI)
You can change the settings of the machine with NetSpot Console, NetSpot Device
Installer, or a web browser (Remote UI). The setting items you can change are
shown below.
■ Common Settings
NOTE
Items with an asterisk (*) cannot be set using NetSpot Device Installer. Items with
asterisks (**) cannot be set using NetSpot Device Installer and NetSpot Console. Set
them using the Remote UI.
Item Setting Description
Default
Setting
Device Name Device name (0 to 63 characters) (null)
Location
Device installation location (0 to 63
characters)
(null)
Administrator
Device administrator name (0 to 63
characters)
(null)
Phone
Telephone number of contact person (0 to 63
characters)
(null)
Contact Person Contact person's name (o to 63 characters) (null)
Phone
Telephone number of contact person (0 to 63
characters)
(null)
Administrator Password Device password (0 to 15 characters) (null)
Permit End-user’s Job
Operation* Whether or not to permit operating print job
in general user mode
(Off)
Link**
Link name displayed on support link page of
the Remote UI
(null)
URL**
URL displayed on support link page of the
Remote UI
(null)
Comments**
Comments displayed on support link page of
the Remote UI
(null)