Canon ImageCLASS MF8180c - Manual (Page 34)

Additional Protocol Settings 2-23
Sp
ec
ifyin
g
th
e Ne
twor
k Set
tin
gs
2
Additional Protocol Settings
This section describes two additional protocols supported for this machine: HTTP
(HyperText Transfer Protocol) and SNMP (Simple Network Management Protocol).
HTTP
The HTTP allows you to communicate between your computer and the machine via
a web interface (i.e., Remote UI).
Before you use the Remote UI, follow the procedure below to activate HTTP on the
machine from the <NETWORK SETTINGS> menu.
1
Press [Menu].
2
Press [ (-)] or [ (+)] to select <NETWORK SETTINGS>
➞ press
[Set].
3
Press [ (-)] or [ (+)] to select <LAN SETTINGS>
➞ press [Set].
4
Press [ (-)] or [ (+)] to select <USE HTTP>
➞ press [Set].
5
Press [ (-)] or [ (+)] to select <ON>
➞ press [Set].
6
Specify the HTTP port number (default: 80) using the numeric
keys.
7
Press [Stop/Reset] to return to the standby display.