Canon ds6041 - Manual (Page 118)

118
While [Stop] is displayed on the
LCD monitor, press < p>.
s The printing will stop.
s When the confirmation dialog appears,
press the <µ> keys to select [OK],
then press < p>.
Direct Printing with DPOF
Stopping the Printing
Stopping the Printing
With a card photo printer:
If only one print is being printed, the printing cannot be stopped. If two or
more prints are being printed, the printing will stop with the next print.
With BJ printers:
The printing will stop and the paper being printed will be discharged.
Resuming the Printing
•
On the direct printing screen, after printing is stopped, press the <å>
keys to select [Resume], then press < p>.
•
Printing cannot be resumed in the following cases:
•
Before resuming the printing, you changed the printing options.
•
Before resuming the printing, you erased an image that was to be
printed.
•
When you stopped the printing, CF card’s remaining capacity was
low.
Resolving Printing Errors
If an error occurs during printing, an error message will appear on the LCD
monitor.
•
If [Resume] is displayed, correct the error, then select [Resume] and
press <p>. After you press <p> and “Stop printing?” appears, select
[Cancel] and press <p>. The printing will resume. With certain
printers, the printing may resume automatically.
•
If only [Stop] is displayed, press <p>. After correcting the problem,
start over again to print.