FRIGIDAIRE FFTW1001PW - Manual (Page 10)

10
ACCESSORIES
Replacement parts:
If replacements parts are needed for your washer, contact
the source where you purchased your washer or refer to
your Use and Care Guide for more information.
To remove the console faceplate follow the directions
below:
1. Disconnect washer from electrical source.
2. Remove four screws on back of the console housing.
3. Slowly rotate console forward on hinge tabs.
MOBILE HOME INSTALLATION KIT
P/N 137067200
Installation in a mobile home requires the use of a
MOBILE HOME INSTALLATION KIT.
INLET HOSE KITS
Please call 866-233-8353 (in Canada, 800-265-8352)
to explore hose kit options that will meet your specifi c
installation needs.
UNIVERSAL APPLIANCE WRENCH
P/N 137019200
A UNIVERSAL APPLIANCE WRENCH is available to aid in
dryer/washer feet adjustment.
TOUCH UP PAINT PENS*
Classic White Touch Up Pen - P/N 5304468812
*Other colors may be available. Contact the source where you
purchased your washer.
Technical Sheet/Wiring Diagram:
CONSOLE SCREWS
IMPORTANT
Internal parts of console are attached with wires to the
washer. Prevent machine damage. Do NOT pull console
away from washer.
CAUTION
Failure to use accessories manufactured by (or approved
by) the manufacturer could result in personal injury,
property damage or damage to the washer.
WARNING
ELECTRICAL SHOCK HAZARD
Label all wires prior to disconnection when servicing
controls. Wiring errors can cause improper and dangerous
operation. Verify proper operation after servicing.
NOTE
A wiring diagram and technical data sheet are located
inside the washer console.
4. When fi nished with repair, return sheet inside console
and ensure hinge tabs are inserted in top panel.
Gently rotate console back and reinsert all four screws.
HINGE TABS