Cisco Digital Camera User Manual
Page 3
3
Administration Guide, available at this URL:
Verify the following before you begin installing Cisco VT Advantage and the
Cisco VT Camera:
•
Ensure that your Cisco IP Phone is connected to your corporate
telephony network. If your Cisco IP Phone is powered on and you can
make voice calls, then you are properly connected.
•
Ensure that your Cisco IP Phone is video enabled. If the LCD screen on
your Cisco IP Phone displays this video icon
on the status line,
then your phone is video enabled. (If you do not see an icon similar to
this one on your IP Phone, contact your system administrator.)
•
Ensure that a standard Ethernet cable is connected from your personal
computer’s (PC) Ethernet input to the Access Port labelled “10/100 PC”
on the back of your Cisco IP Phone. On most PCs, you can verify that
this connection is working by the presence of a lit green LED at the point
where the Ethernet cable plugs into the PC.