FRIGIDAIRE FARE4044MW - Manual (Page 9)

9
OPERATING INSTRUCTIONS
Cycle Settings
Appropriate drying temperature, dryness level and
options will automatically be displayed for each cycle. The
settings can be modifi ed before the cycle is started. Make
modifi cations based on load size, dampness and fabric
type and durability. Modifi cations for each cycle will be
remembered and recalled each time that cycle is selected
in the future.
Follow the fabric care label instructions
on items to be dried.
For best results
Í NOTE
To change the settings once the cycle has begun, push
in the cycle selector knob to pause the cycle, make the
new selections and push in the selector knob again to
restart the dryer.
If changes are attempted after the cycle starts, the
lights will fl ash and a signal will beep, but the cycle will
continue.
NSF Protocol P154
Sanitization Performance of
Residential Clothes Dryers
sanitize
Recommended for durable fabrics and towels. Use this
selection to remove harmful bacteria from your clothing
or other items where sanitization is desired.
This option will kill 99.9% of bacteria with no carryover of
bacteria between loads. A higher temperatures is required.
Please check fabric care labels to prevent damage.
Dryness Level (Auto Dry)
To change the preset level, press the dryness level
button to scroll to the degree of dryness desired.
To protect your fabrics, not all dryness levels are available
with every cycle. If a dryness level is not appropriate
for the cycle, it cannot be selected.
The dryness level selected for the cycle will be
remembered and recalled each time that cycle is selected in
the future.
Select the normal dry level for most Auto Dry cycles.
Occasionally a load may seem too damp or over-dried at
the end of the cycle. To increase drying time for similar
loads in the future, select high. For loads requiring less
drying time, select low.
Select damp for items you wish to partially dry before
hanging or ironing.
Í NOTE
Only sanitizing cycles have been designed to meet the
requirements of NSF P154 protocol for sanitization
effi cacy.
high
Recommended for most cotton fabrics.
normal
Recommended for wrinkle free, easy care, lightweight
fabrics and bulky loads.
low
Recommended for delicate fabrics.
air dry
This setting (no heat) can only be selected with a timed
cycle. The air dry setting tumbles the load without
heat. Use this setting to dry items containing feathers,
down, foam rubber, plastics or rubber-like materials;
to refresh clothing, stuffed animal, pillows or blankets;
and to dust draperies.
Drying Temperature
To change the preset temperature, press the temp
button to scroll to the desired setting.
To protect your fabrics, not all temperatures are available
with every cycle.
The temperature selected for the cycle will be remembered
and recalled each time that cycle is selected in the future.
To return to factory settings,
press these two buttons at
the same time and hold until
the signal sounds.