Canon SELPHY ES2 - Manual (Page 58)

Printing via Bluetooth
58 Printing from a Mobile Phone (Wireless Printing)
5
Transmit an image from your mobile phone to the printer.
• Printing starts after
data transmission is
completed.
5 • Bluetooth Unit blinks blue during transmission. If data transfer is interrupted, the blinking will
stop. Check the message appearing on the mobile phone display if an error occurs.
• Printing cannot be canceled by pressing during Bluetooth printing.
• For details on how to send or make Bluetooth connection, refer to the Bluetooth manual.
• Maximum communication distance is approx.10 m (approx. 33 ft.). However, the following
conditions sometimes cause this distance or printing speed to change:
- Obstacles or radio wave conditions between communication devices
- Sites where magnetic fields, static electricity or radio wave interference is generated
- Reception sensitivity and antenna performance of the communication devices
Up to approx. 10 m (33 ft.)