Canon SELPHY ES2 - Manual (Page 79)

Making Printer Settings
79 Appendix
Printer Setup Menu
The default setting is marked as .
Bluetooth Settings
Item Description Settings
Auto Rotate By setting the camera, the image can be automatically
rotated on the LCD monitor. On , Off
Auto Power
Down The printer automatically turns off if no operation is
performed for five minutes. On , Off
Bluetooth Sets the model name and/or security details when using
Bluetooth. [Bluetooth] is displayed only when a Bluetooth
unit (sold separately) is connected. Refer to p. 79
Language Sets the display language of the LCD monitor. Refer to p. 81
Transition Sets the transition effects when you switch the image. Fade, Wipe,
Off
Reset All Reset the printer's settings to their defaults. –
Device name Selects a name from Canon ES2-1 ( ) to ES2-9 (ES20-1 to ES20-9).
This is the name used when the target device (this printer) is selected
from the mobile phone. This setting distinguishes this device when
there are two or more Bluetooth-enabled devices capable of
communication.
Security Selects either [On] or [Off] ( ). When set to [On], the passkey for the
printer and mobile phone must be entered when connecting to the
printer.
Passkey The passkey refers to an identification number to be determined. It is
used to prevent incorrect access from other Bluetooth devices. When
[Security] is set to [On], press
and set the key (4-digit
number) to enter on the mobile phone to enable printing. The default
passkey is "0000".
Deny Access Selects either [On] or [Off] ( ). Selecting [On] will disable searching
and printing from Bluetooth devices.
Reset Reset Bluetooth settings to their defaults.